Toshiba BPN-13 R5 Horizontal Boring Mill
Manufacturer serial number: 230033
Specifications subject to verification, angle plates not included
SPINDLE DIAMETER..................: 5.12" MILLING SPINDLE DIAMETER..........: 8.9" SPINDLE TAPER.....................: 50# ATC...............................: 32 W-AXIS SPINDLE TRAVEL.............: 27.6" X-AXIS LONGITUDINAL TABLE TRAVEL..: 94" Y-AXIS VERTICAL SPINDLE TRAVEL....: 90.0" Z-AXIS CROSS COLUMN TRAVEL........: 59" WORKING SURFACE OF TABLE..........: 71" x 86" VARIABLE FEED RATES...............: 0 - 140.0 IPM SPINDLE SPEEDS....................: (3)0 - 2000 RPM RAPID TRAVERSE RATE...............: 240 IPM MAIN MOTOR........................: 30/25 HP MAXIMUM WORK PIECE WEIGHT.........: 22,000 lbs. FLOOR SPACE.......................: 379" x 205" WEIGHT............................: 44,000 lbs.
Giddings & Lewis 512 series Vertical Turning center with 48” table with pallet changer
Manufacturer serial number: 512-326-92
Control Serial number: 512-0326
It is equipped with NumeriPath 8000B control. Both machine and control are capable in addition to turning to perform milling, drilling & circular interpolation in X, Z & C Axis.
48” Table Diameter (4-Jaw Combination Hydraulic Chuck)
60” Table Swing
CAT60 Ram Taper
75HP Table Drive
360,000 Degree Table Positioning
Live/milling spindle max RPM 2200
20HP Live/milling Spindle
50 pockets tool changer magazine (45 pockets tool magazine + 5 pockets staging tool magazine)
Plus Auxiliary 30 tools carousel
Twin pallet changer
Touch probe & Renishaw probe
Automatic Ram Leveling feature
Showroom demo VM-2 VMC with Fanuc Oi-MF
Standard Specifications
Controller (PLC) – Fanuc 0i-MF
10.4″ LCD Touch Screen
Convection heat exchange in control box
RS-232 Interface (for computer connection)
Automatic power off
Spindle Speed: 12,000 rpm, #40 Direct Drive Spindle
Spindle nose: CAT40
Spindle motor (Cont. /30min.): 11/15 kW
Air blast through spindle
Spindle air curtain
Coolant through spindle prep only
Table Size: 900 x 500 mm
Max. Table load: 1,000 kg
Distance from spindle center to table surface: 100 – 620 mm
T-Slot (Number*pitch): 5 * 100 mm
Size: 18 mm
3-Axis Travel (X/Y/Z): 800 x 500 x 520 mm
Rapid traverse (X/Y/Z): 36/36/24 M/min.
Cutting feedrate: 1-20000 mm/min
Operation finish lamp
Manual pulse generator (MPG)
3 axis Ball type Linear Guide
Automatic lubrication system
Tool Magazine Arm type tool changer: 24 stations
Air gun
Table side air blast
Coolant gun
Coolant tank
Cooling system
Coolant flushing system (Side flush)
Full splash guard
Machine Size & Weight
(L x W x H): 3578 x 3494 x 2549 mm
5,300 kg
Levelling Bolts & Blocks
Machine other settings
3-Color work lamp
Manual electric drawing equipment
Tool box
Side hinge belt chip conveyor
Edwards JAWS IV 90 ton Ironworker
SPECIFICATIONS
PUNCH: 1″
ANGLE: 6″X6″X3/
SHEAR: 14″ X 5/8″
ROUND: 1″
MOTOR: 7 1/2HP
575V/3PH/60HZ
Hammond K 30 9K Isolation transformer
Copper-Alum windings, 575v-208v, 30KVa
Showroom demo VM-2 VMC with Mitsubishi M80B
Standard Specifications
Controller (PLC) – Mitsubishi M80
15″ LCD Touch Screen
Convection heat exchange in control box
RS-232 Interface (for computer connection)
Automatic power off
Spindle Speed: 12,000 rpm, #40 Direct Drive Spindle
Spindle nose: CAT40
Spindle motor (Cont. /30min.): 11/15 kW
Air blast through spindle
Spindle air curtain
Coolant through spindle prep only
Table Size: 900 x 500 mm
Max. Table load: 1,000 kg
Distance from spindle center to table surface: 100 – 620 mm
T-Slot (Number*pitch): 5 * 100 mm
Size: 18 mm
3-Axis Travel (X/Y/Z): 800 x 500 x 520 mm
Rapid traverse (X/Y/Z): 36/36/24 M/min.
Cutting feedrate: 1-20000 mm/min
Operation finish lamp
Manual pulse generator (MPG)
3 axis Ball type Linear Guide
Automatic lubrication system
Tool Magazine Arm type tool changer: 24 stations
Air gun
Table side air blast
Coolant gun
Coolant tank
Cooling system
Coolant flushing system (Side flush)
Full splash guard
Machine Size & Weight
(L x W x H): 3578 x 3494 x 2549 mm
5,300 kg
Levelling Bolts & Blocks
Machine other settings
3-Color work lamp
Manual electric drawing equipment
Tool box
Side hinge belt chip conveyor
Showroom demo TC-710 with 20 tool arm type ATC and Mitsubishi M80 control
Standard Specifications
| Machine
Controller Spindle Specification Table Specification T-Slot 3-Axis Travel Automatic Tool Changer Flushing System Machine Size & Weight Machine other settings |
TC-710
Controller (PLC) – Mitsubishi M80V(B) Spindle speed: 12,000 rpm, #30 Direct Drive Spindle Swing Arm type tool changer: 20 stations Air gun Machine dimension (L x W x H): 3050x 4100 x2400 mm(120x 161.4×94.4inch) 3-Color work lamp |
Showroom demo TC-710 with 16 tool turret type ATC and Mitsubishi M80 control
Standard Specifications
| Machine
Controller Spindle Specification Table Specification T-Slot 3-Axis Travel Automatic Tool Changer Flushing System Machine Size & Weight Machine other settings |
TC-710
Controller (PLC) – Mitsubishi M80V(B) Spindle speed: 12,000 rpm, #30 Direct Drive Spindle Turret type tool changer: 16 stations Air gun Machine dimension (L x W x H): 3050x 4100 x2400 mm(120x 161.4×94.4inch) 3-Color work lamp |
MT-1400 VMC
Standard Specifications
Controller (PLC) – Fanuc 0i-MD
8.4″ LCD Screen
Convection heat exchange in control box
RS-232 Interface (for computer connection)
Automatic power off
4th axis interface preparation
Spindle Speed: 7,000 rpm, #50 Geared Type
Spindle nose: CAT50
Spindle motor (Cont. /30min.): 15/18.5 kW
Air blast through spindle
Spindle air curtain
Coolant through spindle prep only
Table Size: 1600 x 800 mm (62.9 x 31.5 inch)
Max. Table load: 1,200 kg (2,654lbs)
Distance from spindle nose to table surface: 200 – 900 mm (7.8-35.4 inch)
T-Slot (Number*pitch): 5 * 160 mm (0.2 * 6.2 inch)
Size: 22 mm (0.9 inch)
3-Axis Travel (X/Y/Z): 1400 x 750 x 700 mm (55.1 x 29.5 x 27.6 inch)
Rapid traverse (X/Y/Z): 24/24/20 M/min. (944/944/787 ipm)
Cutting feedrate: 1-20000 mm/min (393ipm)
Operation finish lamp
Manual pulse generator (MPG)
3 axis Roller type Linear Guide
Automatic lubrication system
Tool Magazine Arm type tool changer: 24 stations
Air gun
Table side air blast
Coolant gun
Coolant tank
Cooling system
Coolant flushing system (Side flush)
Full splash guard
ChipBlaster D30 high pressure coolant pump with filtration
• (8 gpm @ 1000 psi) 30 lpm @ 70 bar
• Dual Pleated Filters (10 Micron
• Single “m” code controlled outlet
Herbert WKT41-25 multi head drill press and tapping head
HERBERT 3-spindle drill + 1 spindle tapping
Machine type [—] Standing drill
Machine type [—] WKT 41/25
Manufacturer [—] Alfred Herbert
Condition [—] good
Number of spindles [—] 3 + 1
Spindle speed [spindle 1, 2 and 3]: 106-2850 RPM
Number of spindle speeds [—] 8
Work table dimensions 15.5” x 68”
Power [HP] 0.9
Overall dimensions of the machine approx. 76.5″ wide x 35″ deep x 93″ tall
Machine weight approx. 2,500 lbs.
WL-580 Engine Lathe
22.75″ swing over bed
14.17″ swing over cross slide
80″ between centers
250mm 3 jaw chuck
400mm independent 4 jaw chuck
Follower rest
Roller steady rest
Inch/Metric threading
Wells F-16-1 Saw
Machine Specifications
• Capacity: Rectangular at 90° 16″ High x 20″ Wide, Round at 90° 16″ Diameter
• Rectangular at 45° 16″ High X 9″ Wide, Round at 45° 9″ Diameter
• Weight Capacity: 5,000 lbs
• Blade Speed: 60-425 SFPM
• Blade Size: 1¼” X .042″ X 15′
• Sawing Feed: Variable, Hydraulic
• Blade Guide: Rollers and Carbide Side Blocks
• Blade Tension: Manual with Indicator
• Bandwheel Size: 20″ Voltage
• Vise: Manual, 8-1/2” 208-60-3
• Blade Drive: 7½ HP, 3ph, AC Vector Drive 230-60-3
• Sawing Force: 30-120 lbs 460-60-3
• Coolant Capacity: 15 Gallons 575-60-3 (5 HP)
• Hydraulic Capacity: ¾ Gallon
• Hydraulic Drive: ⅓ HP Motor
• Work Height: 26″
• Machine Dimensions: 97″ Length x 49″ Width x 83″ Height
Tschudin HTG 400
GENERAL SPECIFICATIONS
• Make: Tschudin
• Type: Universal cylindrical grinder
• Model: HTG 400
• Swing: 8″
• Centers: 16”
• Wheel diameter: 12″
Hitachi Seiki HT23S II
Controller type SEIKI MULTI
Swing over saddle in 15
Turning diameter in 10
Max. turning length in 23.6
Spindle nose taper ASA A 2-8
Power chuck diameter in 10
Spindle speed rpm 3500
Spindle motor power (Cont./30 min) hp 20/25
Bar capacity in 2.5
Number of tool station 10
Square shank tooling size in 1
Round shank tooling size in 1-1/4
Weight Lbs. 9500
Nakamura TMC-35
Controller type Fanuc
Swing over saddle in 19.69
Turning diameter in 13
Max. turning length in 49.6
Spindle nose taper ASA A 2-8
Power chuck diameter in 12
Spindle speed rpm 3500
Spindle motor power (Cont./30 min) hp 20/25
Bar capacity in 2.5
Number of tool station 10
Square shank tooling size in 1
Round shank tooling size in 1-1/2
Weight Lbs. 9900
Hardinge HSL-59
GENERAL SPECIFICATIONS
• Make: Hardinge
• Type: Super-Precision Lathe
• Model: HSL-59
• Spindle Capacity: 1-1/16″
• Variable Spindle Speeds:750/1800/3500 RPM
• Length of Bed: 10″
• Swing over Bed: 9″
• Approximate Weight: 300 Lbs.
Hardinge DSM-59
GENERAL SPECIFICATIONS
• Make: Hardinge
• Type: Super-Precision Lathe
• Model: DSM-59
• Spindle Capacity: 1-1/16″
• Variable Spindle Speeds: 230 – 3500 RPM
• Length of Bed: 36″
• Swing over Bed: 9″
• Travel of Double Cross Slide 3-3/4″
• Travel of Turret Slide 4″
• Drive: Infinitely Variable Spindle Speeds Drive
• Cross Slide: Double Tool Cross Slide
• Spindle: Preloaded Ball Bearing Spindle Construction
• Tailstock: Included
• Coolant Capacity: 3 Gal.
• Approximate Weight: 1000 Lbs.
Graziano Tortona SAG 14
| Swing | in | 14.9 |
| Gap swing | in | 19 |
| Max. turning length | in | 40 |
| Spindle speed | rpm | 1500 |
| Bar capacity | in | 1.8 |
Gorton 375-2
SERIAL ………………………………….. 27800
MODEL …………………………………. 375-2
SPINDLE SPEED HIGH …………….. 3230 RPM
SPINDLE LOW ………………………. 1440 RPM
MAXIMUM WHEEL DIAMETER …………. 6″
MAXIMUM COLLET DIAMETER ………… 5/8″
SOLID SLEEVE DIAMETER ………….. 1″
GRINDS ……………………….. 2,3,4 & 6 FLUTES CUTTER TO 1″
COLLETS ………………………. HARDINGE 4NS
MOTOR ………………………… 1/2 HORSEPOWER
