UZ-2000T2MW
Multi-Axis Machine for Mass Production. Increase Your Working Range and Large Working Area on Upper & Lower Turrets
· Gear-driven BMT live tool turret
· 2-turret construction
· 16+16 tools number of tool station
· One-piece bed, 45° slant-bed structural design
· Max. Swing: 660 mm
· Max. Length: 810 mm
· Spindle: A2-5 in 5000 (Built-in), 3500 / 2500(Belt) rpm
· Bar capacity: 52 mm
· Main spindle motor 11/15kW(Built-in) or 15/18.5kW(Belt)
| ITEM/MODEL | UZ-2000T2MW | ||||
| Controller | FANUC 0i-T | ||||
| Swing over bed | mm | 660 | |||
| Swing over saddle | mm | 620 | |||
| Max. Turning Diameter(Main-Spindle) | mm | 320 | |||
| Max. Turning Diameter(Sub-Spindle) | mm | 320 | |||
| Max. turning length | mm | 810 | |||
| MAIN SPINDLE | |||||
| Spindle Nose | ASA | A2-5(A2-8 / A2-11) | |||
| Chuck Diameter | inch | 6(10 / 15) | |||
| Spindle Speed | rpm | 5000(Built-in), 3500 / 2500(Belt) | |||
| Spindle Motor Power(Cont. /30min) | kW | 11 / 15 (15 / 18.5) | |||
| Bar Capacity | mm | 52(78 / 105) | |||
| TAILSTOCK | |||||
| Tailstock body travel | mm | 770 | |||
| Quill travel | mm | 120 | |||
| Quill diameter | mm | 85 | |||
| Quill taper | MT# | 5 | |||
| TRAVELS | |||||
| X-axis Travel | mm | X1/X2:210 | |||
| Z-axis Travel | mm | Z1/Z2 : 840 | |||
| FEEDS | |||||
| X-axis Rapid Traverse Rate | m/min | 24 | |||
| Z-axis Rapid Traverse Rate | m/min | 40 | |||
| TURRET | |||||
| Tooling system | BMT 40 | ||||
| Turret driven type | Servo mechanical | ||||
| Number of tools | station | 16+16 | |||
| Square tool shank size | mm | 20(25) | |||
| Round tool shank size | mm | 32(40) | |||
| Rotary tool spindle power | kW | 4.5 | |||
| Rotary tool spindle speed | rpm | 6000 | |||
| DIMENSION | |||||
| Machine dimension L x W x H | m | 4.7 x 2.4 x 2.3 | |||
| Net weight | kg | 10500 | |||
| NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
| 1 | FANUC 0i-T controller | 1 | Unloader & conveyor for finished parts | |
| 2 | 10.4″ Colored LCD monitor + Manual guide i | 2 | Parts catcher with parts conveyor | |
| 3 | Heat exchanger for electric cabinet | 3 | Renishaw special HPRA for main | |
| 4 | Hydraulic power supply unit | 4 | Spindle air blow tube | |
| 5 | 4-bar coolant system | 5 | Automatic door | |
| 6 | Lubrication system | 6 | Bar feeder interface (7 or 24 pins) / Extra M-code card | |
| 7 | Three-color working light | 7 | Bar feeder | |
| 8 | Oil mist collector | |||
| 9 | Oil-coolant skimmer | |||
| 10 | Air cooler for electric cabinet | |||
| 11 | Transformer | |||
| 12 | CE version | |||
| 13 | Collect chuck | |||
| 14 | 20-bar coolant through system | |||
| 15 | Axial rotary tool holder | |||
| 16 | Radial rotary tool holder | |||
| 17 | Linear scale |
