UV-75ATC
Vertical Turning Center
Heavy Duty Cutting Spindle Design on Vertical Turning Center
· ATC-BT50 with 12 station
· Robust and rigid structural design
· Linear guide way type or box way type
· Max. Swing: 850 mm
· Max. Length: 800 mm
· Spindle: A2-11 in 1600 rpm
· 8.4″Fanuc 0i controller with color LCD monitor
ITEM/MODEL | UV-75ATC | |||
Controller | FANUC 0i-T | |||
CAPACITY | ||||
Swing over bed | mm | 850 | ||
Max. turning diameter | mm | 750 | ||
Max. turning length | mm | 800 | ||
SPINDLE | ||||
Spindle Speed | rpm | 1600 | ||
Spindle drive system | belt | |||
Spindle bearing diameter | mm | 160 | ||
Spindle Motor Power(Cont. /30min) | kW | 18.5/22 | ||
Spindle nose taper | ASA | A2-11 | ||
Chuck diameter | inch | 24(32) | ||
TOOL SPINDLE | ||||
Spindle taper | BT50 | |||
TRAVELS | ||||
X-axis Travel | mm | 650 | ||
Z-axis Travel | mm | 800 | ||
X-axis ballscrew diameter | mm | 50 | ||
Z-axis ballscrew diameter | mm | 50 | ||
Guide way type | Linear(Box) | |||
FEEDS | ||||
X-axis Rapid Traverse Rate | m/min | 20 | ||
Z-axis Rapid Traverse Rate | m/min | 24 | ||
TURRET | ||||
Tooling system | ATC | |||
Indexing type | Servo-gear | |||
Turret driven type | Servo mechanical | |||
Number of tools | station | 12 | ||
Tool holder taper size | BT50 | |||
Max. tool length | mm | 400 | ||
Max. tool weight | kg | 50 | ||
Max. magazine load | kg | 420 | ||
MOTOR | ||||
Spindle motor | kW | 18.5/22 | ||
X-axis motor power | kW | 3 | ||
Z-axis motor power | kW | 4 | ||
Hydraulic motor power | kW | 2.2 | ||
Coolant pump motor power | kW | 0.5+1 | ||
DIMENSION | ||||
Machine dimension L x W x H | m | 3.6 x 2.7 x 4 | ||
Net weight | kg | 16000 |
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
1 | FANUC 0i-T controller | 1 | Upgrade to 10.4″ Colored LCD monitor | |
2 | RS-232 interface | 2 | Tool setter | |
3 | Rigid tapping | 3 | Oil mist collector | |
4 | Heat exchanger for electric cabinet | 4 | Oil-coolant skimmer | |
5 | 8.4″ Colored LCD monitor | 5 | Air cooler for electric cabinet | |
6 | Lubrication system | 6 | Gearbox | |
7 | 4-bar coolant system | 7 | Upgrade to non-through hole 3-jaw 32″ hydraulic chuck & cylinder | |
8 | Cutter air blast | 8 | Transformer | |
9 | Spray gun | 9 | CE version | |
10 | Three-color warning light | 10 | Tool Holder |