UT-300S
Slant Bed Turning Center
Multi-Tasking Performance
Main and Sub Spindles Synchronization
· Cam-driven hydraulic/servo turret with 12 station
· One-piece bed, 30° slant-bed structural design
· Max. Swing: 612 mm
· Max. Length: 620 mm
· Spindle: A2-8 in 3500 rpm
· Bar capacity: 75 mm
· 8.4″Fanuc 0i controller with color LCD monitor
| ITEM/MODEL | UT-300S | ||||
| Controller | FANUC 0iT | ||||
| CAPACITY | |||||
| Swing Over Bed | mm | 612 | |||
| Swing Over Saddle | mm | 400 | |||
| Max. Turning Diameter(Main-Spindle) | mm | 500 | |||
| Max. Turning Diameter(Sub-Spindle) | mm | 400 | |||
| Max. Turning Length | mm | 620 | |||
| MAIN SPINDLE | |||||
| Spindle Nose | ASA | A2-8(A2-11) | |||
| Chuck Diameter | inch | 10(12/15) | |||
| Spindle Speed | rpm | 3500(2700/2500/2000) | |||
| Spindle Motor Power(Cont. /30min) | kW | 15/18.5(18.5/22) | |||
| Bar Capacity | mm | 75(90/105/116.5) | |||
| SUB SPINDLE | |||||
| Spindle Nose | ASA | A2-5 | |||
| Chuck Diameter | inch | 6(8) | |||
| Spindle Speed | rpm | 6000(5000) | |||
| Spindle Motor Power(Cont. /30min) | kW | 5.5/7.5 | |||
| Bar Capacity | mm | 44 | |||
| TRAVELS | |||||
| X-axis Travel | mm | 300 | |||
| Z-axis Travel | mm | 750 | |||
| Y-axis Travel | mm | – | |||
| B-axis Travel | mm | 700 | |||
| FEEDS | |||||
| X-axis Rapid Traverse Rate | m/min | 20 | |||
| Z-axis Rapid Traverse Rate | m/min | 24 | |||
| Y-axis Rapid Traverse Rate | m/min | – | |||
| B-axis Rapid Traverse Rate | m/min | 20 | |||
| AXIS MOTOR POWER | |||||
| X-axis | kW | 3 | |||
| Z-axis | kW | 3 | |||
| Y-axis | kW | – | |||
| B-axis | kW | 1.6 | |||
| TURRET | |||||
| Tooling System | BOT | ||||
| Turret Drive Type | Hydraulic(Servo mechanical) | ||||
| Number of Tool Station | 12 | ||||
| Square Tool Shank Size | mm | 25 | |||
| Round Tool Shank Size | mm | 40 | |||
| Max. Rotary Tool Speed | rpm | 4000 | |||
| Rotary Tool Driver Power | kW | 4.5 | |||
| DIMENSIONS | |||||
| Floor Space Required | m | 3.5 x 1.8 x 1.9 | |||
| Machine Weight | kg | 5900 | |||
| NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
| 1 | FANUC 0i-T controller | 1 | Upgrade to 10.4″ Colored LCD monitor | |
| 2 | RS-232 interface | 2 | Collect chuck | |
| 3 | Rigid tapping | 3 | Tool setter | |
| 4 | Heat exchanger for electric cabinet | 4 | Parts catcher and parts conveyor | |
| 5 | 8.4″ Colored LCD monitor | 5 | Bar feeder interface (7 or 24 pins) | |
| 6 | Lubrication system | 6 | Bar feeder | |
| 7 | 4-bar coolant system | 7 | Oil mist collector | |
| 8 | Three-color warning light | 8 | Oil-coolant skimmer | |
| 9 | Air cooler for electric cabinet | |||
| 10 | Steady rest | |||
| 11 | Gear box | |||
| 12 | Transformer | |||
| 13 | CE version | |||
| 14 | Linear scale |
