UT-2000T2M
Slant Bed Turning Center
Multi-axis Machine for Mass Production
Increase Your Working Range and Large Working Area on 2 Upper Turrets
· Gear-driven BMT live tool turret
· Opposed two-spindle, 2-turret construction
· 12+12 tools number of tool station
· One-piece bed, 45° slant-bed structural design
· Max. Swing: 600 mm
· Max. Length: L: 350 mm / R: 240 mm
· Spindle: A2-6 in 4500 rpm
· Bar capacity: 52 mm
· Left spindle motor 11/15kW(Built-in) or 15/18.5kW(Belt)、Right spindle motor 11/15kW(Built-in)
| ITEM/MODEL | UT-2000T2M | ||||
| Controller | FANUC 0iT | ||||
| CAPACITY | |||||
| Swing Over Bed | mm | 600 | |||
| Swing Over Saddle | mm | 260 | |||
| Max. Turning Diameter(Main-Spindle) | mm | 220 | |||
| Max. Turning Diameter(Sub-Spindle) | mm | 220 | |||
| Max. Turning Length(L/R) | mm | 350/240 | |||
| MAIN SPINDLE | |||||
| Spindle Nose | ASA | A2-6(A2-8) | |||
| Chuck Diameter | inch | 8(6/8/10) | |||
| Spindle Speed | rpm | 4500(6000/4000/3500) | |||
| Spindle Motor Power(Cont. /30min) | kw | 11/15(15/18.5) | |||
| Bar Capacity | mm | 52(44/65/75) | |||
| SUB SPINDLE | |||||
| Spindle Nose | ASA | A2-5 | |||
| Chuck Diameter | inch | 6(8) | |||
| Spindle Speed | rpm | 6000(5000) | |||
| Spindle Motor Power(Cont. /30min) | kw | 5.5/7.5 | |||
| Bar Capacity | mm | 44 | |||
| TRAVELS | |||||
| Z-axis Travel | mm | 220 | |||
| X-axis Travel | mm | 350 | |||
| B-axis Travel | mm | 900 | |||
| FEEDS | |||||
| X-axis Rapid Traverse Rate | m/min | 20 | |||
| Z-axis Rapid Traverse Rate | m/min | 20 | |||
| B-axis Rapid Traverse Rate | m/min | 20 | |||
| AXIS MOTOR POWER | |||||
| X-axis | kw | 3 | |||
| Z-axis | kw | 1.6 | |||
| B-axis | kw | 1.6 | |||
| TURRET | |||||
| Turret Drive Type | Servo-mechanical | ||||
| Number of Tool Station | 12+12 | ||||
| Square Tool Shank Size | mm | 20 | |||
| Round Tool Shank Size | mm | 32 | |||
| Max. Rotary Tool Speed | rpm | 6000 | |||
| Rotary Tool Driver Power | kw | 4.5 | |||
| DIMENSIONS | |||||
| Machine dimension L x W x H | m | 3.9 x 2.1 x 1.9 | |||
| Machine Weight | kg | 6000 | |||
| NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
| 1 | FANUC 0i-T controller | 1 | Upgrade to 10.4″ Colored LCD monitor | |
| 2 | RS-232 interface | 2 | Collect chuck | |
| 3 | Rigid tapping | 3 | Tool setter | |
| 4 | Heat exchanger for electric cabinet | 4 | Parts catcher and parts conveyor | |
| 5 | 8.4″ Colored LCD monitor | 5 | Bar feeder interface (7 or 24 pins) | |
| 6 | Lubrication system | 6 | Bar feeder | |
| 7 | 4-bar coolant system | 7 | Oil mist collector | |
| 8 | Three-color warning light | 8 | Oil-coolant skimmer | |
| 9 | Air cooler for electric cabinet | |||
| 10 | Transformer | |||
| 11 | CE version | |||
| 12 | Axial rotary tool holder | |||
| 13 | Radial rotary tool holder | |||
| 14 | Linear scale |
