UM-85H
Vertical Machining Center
Best for machining small and precision dies and molds.
· 24-station, swing-arm automatic tool changer .
· Spindle speed 12000 / 15000 rpm
· Direct driven spindle design
· Table dimension: 1100 x 600 mm
· FANUC 0i-M controller with LCD monitor.
· Linear guides on all axis.
| ITEM/MODEL | UM-85H | |||
| Controller | FANUC 0i-M | |||
| SPINDLE | ||||
| Spindle speed | rpm | 12000(15000) | ||
| Spindle nose taper | BT40 | |||
| Bearing inner diameter | mm | 70 | ||
| Drive system | Direct | |||
| TRAVELS | ||||
| X-axis travel | mm | 850 | ||
| Y-axis travel | mm | 550 | ||
| Z-axis travel | mm | 550 | ||
| Spindle nose to table | mm | 150~700 | ||
| TABLE | ||||
| Table dimension | mm | 1100 x 600 | ||
| T-slot(No. of T-slot x width x pitch) | 5 x 18 x 100 | |||
| Max. weight on table | kg | 1000 | ||
| FEED RATES | ||||
| X-axis Rapid Traverse Rate | m / min | 42 | ||
| Y-axis Rapid Traverse Rate | m / min | 42 | ||
| Z-axis Rapid Traverse Rate | m / min | 36 | ||
| Cutting feed rate | m / min | 12 | ||
| Ball screw diameter(X/Y/Z) | mm | 45/45/45 | ||
| Guideway type | Roller | |||
| AUTOMATIC TOOL CHANGE SYSTEM | ||||
| Tool magazine capacity | pcs | 24(30/32) | ||
| Max. tool weight | kg | 7 | ||
| Max. tool diameter | mm | 80 | ||
| Max. tool diameter without adjacent tools | mm | 150 | ||
| Method of tool exchange | Arm type | |||
| Max. tool length | mm | 300 | ||
| MOTOR | ||||
| AI contour control | AICC I (AICC II) | |||
| Spindle motor power(Cont. / 30min) | kW | 7.5 / 11(15 / 18.5) | ||
| X/Y/Z feed motor | kW | 3/3/4 | ||
| Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 | ||
| OTHERS | ||||
| Air supply | kg/cm² | 5.5 | ||
| Machine dimension L x W x H | m | 2.7 x 2.2 x 3 | ||
| Net weight | kg | 7000 | ||
| NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
| 1 | FANUC 0i-M controller + AICC I | 1 | Data server 2G | |
| 2 | RS-232 interface | 2 | Linear scale (Heidenhain) | |
| 3 | Rigid tapping | 3 | Contact tool setter | |
| 4 | Heat exchanger for electric cabinet | 4 | Workpiece touch probe | |
| 5 | 8.4″ Colored LCD monitor | 5 | Air cooler for electric cabinet | |
| 6 | Lubrication system | 6 | Spindle speed upgrading | |
| 7 | 4-bar coolant system | 7 | Upgrade to 10.4″ Colored LCD monitor | |
| 8 | Cutter air blast | 8 | 20 bar coolant through spindle system | |
| 9 | Spray gun | 9 | Oil-coolant skimmer | |
| 10 | Three-color warning light | 10 | Oil mist collector | |
| 11 | Spindle oil cooling system | 11 | 4th axis interface + FANUC motor & driver | |
| 12 | 4th axis rotary table | |||
| 13 | 2-step gear box | |||
| 14 | Z-axis travel 740mm | |||
| 15 | Automatic door | |||
| 16 | Chain type chip conveyor + chip cart | |||
| 17 | Transformer | |||
| 18 | CE version | |||
| 19 | AICC II | |||
| 20 | Spindle air blow tube |
