UM-210
Vertical Machining Center
Best for machining small and precision dies and molds.
· Increased capacity, improved capacity and better all around performance.
· Heavy-duty linear guide ways in all three axes.
· 24-station, swing-arm automatic tool changer .
· Spindle speed 6000 rpm
· Belt driven spindle design
· Table dimension: 2200 x 1000 mm
· FANUC 0i-M controller with LCD monitor
ITEM/MODEL | UM-210 | ||
Controller | FANUC | ||
SPINDLE | |||
Spindle speed | rpm | 6000 | |
Spindle nose taper | BT50 | ||
Bearing inner diameter | mm | 90 | |
Drive system | 2-speed gear | ||
TRAVELS | |||
X-axis travel | mm | 2100 | |
Y-axis travel | mm | 850 | |
Z-axis travel | mm | 850 | |
Spindle nose to table | mm | 150~1000 | |
TABLE | |||
Table dimension | mm | 2200 x 1000 | |
T-slot(No. of T-slot x width x pitch) | mm | 8 x 18 x 120 | |
Max. weight on table | kg | 2500 | |
FEED RATES | |||
X-axis Rapid Traverse Rate | m / min | 15 | |
Y-axis Rapid Traverse Rate | m / min | 15 | |
Z-axis Rapid Traverse Rate | m / min | 15 | |
Cutting feed rate | m / min | 12 | |
Ball screw diameter (X/Y/Z) | mm | 50/50/50 | |
Guideway type | Box | ||
AUTOMATIC TOOL CHANGE SYSTEM | |||
Tool magazine capacity | pcs | 24(32) | |
Max. tool weight | kg | 15 | |
Max. tool diameter | mm | 110 | |
Max. tool diameter without adjacent tools | mm | 200 | |
Method of tool exchange | Arm type | ||
Max. tool length | mm | 300 | |
OTHERS | |||
AI contour control | AICC I | ||
Spindle motor power(Cont. / 30min) | kW | 22 / 26 | |
X/Y/Z feed motor | kW | 4/4/7 | |
Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 | |
OTHERS | |||
Air supply | kg/cm² | 5.5 | |
Machine dimension L x W x H | m | 5.4 x 3.9 x 3.0 | |
Net weight | kg | 17000 |
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
1 | FANUC controller + AICC I | 1 | Data server 2G | |
2 | RS-232 interface | 2 | Linear scale (Heidenhain) | |
3 | Rigid tapping | 3 | Contact tool setter | |
4 | Heat exchanger for electric cabinet | 4 | Spindle speed upgrading | |
5 | Spindle oil cooling system | 5 | Spindle air blow tube | |
6 | 8.4″ Colored LCD monitor | 6 | Upgrade to 10.4″ Colored LCD monitor | |
7 | Lubrication system | 7 | 20 bar coolant through spindle system | |
8 | 4-bar Coolant system | 8 | Oil-coolant skimmer | |
9 | Cutter air blast | 9 | Oil mist collector | |
10 | Spray gun | 10 | 4th axis interface + FANUC motor & driver | |
11 | Three-color warning light | 11 | 4th axis rotary table | |
12 | Automatic door | |||
13 | Caterpillar type chip conveyor + chip cart | |||
14 | Transformer | |||
15 | CE version |