UM-160W
Vertical Machining Center
Best for machining small and precision dies and molds.
· Increased capacity, improved capacity and better all around performance.
· Heavy-duty linear guide ways in all three axes.
· 24-station, swing-arm automatic tool changer .
· Spindle speed 6000 rpm
· Table dimension: 1700 x 880 mm
· FANUC 0i-M controller with LCD monitor
| ITEM/MODEL | UM-160 | ||
| Controller | FANUC 0i-M | ||
| SPINDLE | |||
| Spindle speed | rpm | 6000 | |
| Spindle nose taper | BT50 | ||
| Bearing inner diameter | mm | 90 | |
| Drive system | 2-speed gear | ||
| TRAVELS | |||
| X-axis travel | mm | 1600 | |
| Y-axis travel | mm | 850 | |
| Z-axis travel | mm | 850 | |
| Spindle nose to table | mm | 150~1000 | |
| TABLE | |||
| Table dimension | mm | 1700 x 880 | |
| T-slot(No. of T-slot x width x pitch) | mm | 7 x 18 x 120 | |
| Max. weight on table | kg | 2000 | |
| FEED RATES | |||
| X-axis Rapid Traverse Rate | m / min | 15 | |
| Y-axis Rapid Traverse Rate | m / min | 15 | |
| Z-axis Rapid Traverse Rate | m / min | 15 | |
| Cutting feed rate | m / min | 12 | |
| Ball screw diameter (X/Y/Z) | mm | 50/50/50 | |
| Guideway type | Box | ||
AUTOMATIC TOOL CHANGE SYSTEM | |||
| Tool magazine capacity | pcs | 24(32) | |
| Max. tool weight | kg | 15 | |
| Max. tool diameter | mm | 110 | |
Max. tool diameter without adjacent tools | mm | 200 | |
| Method of tool exchange | Arm type | ||
| Max. tool length | mm | 300 | |
| OTHERS | |||
| AI contour control | AICC I | ||
| Spindle motor power(Cont. / 30min) | kW | 15 / 18.5 | |
| X/Y/Z feed motor | kW | 4/4/7 | |
| Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 | |
| OTHERS | |||
| Air supply | kg/cm² | 5.5 | |
| Machine dimension L x W x H | m | 5.4 x 3.9 x 3.0 | |
| Net weight | kg | 15000 | |
| NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
| 1 | FANUC 0i-M controller + AICC I | 1 | Data server 2G | |
| 2 | RS-232 interface | 2 | Linear scale (Heidenhain) | |
| 3 | Rigid tapping | 3 | Contact tool setter | |
| 4 | Heat exchanger for electric cabinet | 4 | Spindle speed upgrading | |
| 5 | Spindle oil cooling system | 5 | Spindle air blow tube | |
| 6 | 8.4″ Colored LCD monitor | 6 | Upgrade to 10.4″ Colored LCD monitor | |
| 7 | Lubrication system | 7 | 20 bar coolant through spindle system | |
| 8 | 4-bar coolant system | 8 | Oil-coolant skimmer | |
| 9 | Cutter air blast | 9 | Oil mist collector | |
| 10 | Spray gun | 10 | 4th axis interface + FANUC motor & driver | |
| 11 | Three-color warning light | 11 | 4th axis rotary table | |
| 12 | Automatic door | |||
| 13 | Chain type chip conveyor + chip cart | |||
| 14 | Transformer | |||
| 15 | CE version |
