UM-110H
Vertical Machining Center
Best for machining small and precision dies and molds.
· 24-station, swing-arm automatic tool changer.
· Spindle speed 12000 / 15000 rpm
· Direct driven spindle design
· Table dimension: 1200 x 600 mm
· FANUC 0i-M controller with LCD monitor.
· Linear guides on all axis.
ITEM/MODEL | UM-110H | ||
Controller | FANUC 0i-M | ||
SPINDLE | |||
Spindle speed | rpm | 12000(15000) | |
Spindle nose taper | BT40 | ||
Bearing inner diameter | mm | 70 | |
Drive system | Direct | ||
TRAVELS | |||
X-axis travel | mm | 1100 | |
Y-axis travel | mm | 550 | |
Z-axis travel | mm | 550 | |
Spindle nose to table | mm | 150~700 | |
TABLE | |||
Table dimension | mm | 1200 x 600 | |
T-slot(No. of T-slot x width x pitch) | mm | 5 x 18 x 100 | |
Max. weight on table | kg | 1200 | |
FEED RATES | |||
X-axis Rapid Traverse Rate | m / min | 42 | |
Y-axis Rapid Traverse Rate | m / min | 42 | |
Z-axis Rapid Traverse Rate | m / min | 36 | |
Cutting feed rate | m / min | 12 | |
Ball screw diameter(X/Y/Z) | mm | 45/45/45 | |
Guideway type | Roller | ||
AUTOMATIC TOOL CHANGE SYSTEM | |||
Tool magazine capacity | pcs | 24(30/32) | |
Max. tool weight | kg | 7 | |
Max. tool diameter | mm | 80 | |
Max. tool diameter without adjacent tools | mm | 150 | |
Method of tool exchange | Arm type | ||
Max. tool length | mm | 300 | |
MOTOR | |||
AI contour control | AICC I (AICC II) | ||
Spindle motor power(Cont./30min) | kW | 7.5/11(15/18.5) | |
X/Y/Z feed motor | kW | 3/3/4 | |
Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 | |
OTHERS | |||
Air supply | kg/cm² | 5.5 | |
Machine dimension L x W x H | m | 3 x 2.2 x 3 | |
Net weight | kg | 7500 | |
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES | |
1 | FANUC 0i-M controller +AICC I | 1 | Data server 2G | |
2 | RS-232 interface | 2 | Linear scale (Heidenhain) | |
3 | Rigid tapping | 3 | Contact tool setter | |
4 | Heat exchanger for electric cabinet | 4 | Workpiece touch probe | |
5 | 8.4″ Colored LCD monitor | 5 | Air cooler for electric cabinet | |
6 | Lubrication system | 6 | Spindle speed upgrading | |
7 | 4-bar coolant system | 7 | Upgrade to 10.4″ Colored LCD monitor | |
8 | Cutter air blast | 8 | 20 bar coolant through spindle system | |
9 | Spray gun | 9 | Oil-coolant skimmer | |
10 | Three-color warning light | 10 | Oil mist collector | |
11 | Spindle oil cooling system | 11 | 4th axis interface + FANUC motor & driver | |
12 | 4th axis rotary table | |||
13 | Z-axis travel 740mm | |||
14 | 2-step gear box | |||
15 | Automatic door | |||
16 | Chain type chip conveyor + chip cart | |||
17 | Transformer | |||
18 | CE version | |||
19 | AICC II | |||
20 | Spindle air blow tube |