DCM-4TS Vertical Bandsaw
– Machine frame is completely enclosed steel construction. Sturdiness design guarantees highest efficiency and quiet operation
– 4-way tilting heavy cast iron table with T-slot
– 2-speed transmission is powered by enclosed gears running in continuous bath of oil with infinite vari-speed control unit
– Convenient blade speed tachometer display
– Easy quick adjustable blade guides firmly support blade
– Upper / lower V-type saw guide with ground carbide inserts corresponding to blade size in use. Air nozzle blows off chips as in sawing
– Butt welder and annealing unit provides easy welding work
– Built-in work light
| MACHINE | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model: | DCM-4TS | ||||||||
| Type: | Vertical Bandsaw (with T-slot Table) | ||||||||
| CAPACITY | |||||||||
| Throat capacity: | 15.75″ | ||||||||
| Max. thickness: | 11.00″ | ||||||||
| Table size: | 23.50″ x 19.50″ | ||||||||
| Table inclination (4-way): | 15° | ||||||||
| SAW BLADE | |||||||||
| Speed: | Low 65 ~ 280 fpm / High 400 ~ 1,640 fpm (98 ~ 2,300 fpm optional high speed) | ||||||||
| Length: | 132″ | ||||||||
| Width: | 1/8″ ~ 5/8″ | ||||||||
| BUTT WELDER | |||||||||
| Butt welder capacity: | 1/8″ ~ 5/8″ | ||||||||
| POWER | |||||||||
| Main motor: | 2 HP 3 Phase | ||||||||
| WEIGHT & DIMENSIONS | |||||||||
| Dimensions (LxWxH): | 47-5/16″ x 29-13/16″ x 82-13/16″ | ||||||||
| Net weight: | 970 lb. | ||||||||
| Gross weight: | 1,234 lb. | ||||||||
STANDARD ACCESSORIES:
– Saw blade cutter
– Saw blade welder
– Saw blade grinder
– LED blade speed display
– Air nozzle
– Halogen work light
– Standard saw blade – 1 piece
OPTIONAL ACCESSORIES:
– Rip fence for straight cutting
– Miter protractor for angular cutting
